fuse holders for low-peak cubefuse finger-safe, 1-100a, 600vac/dc catalog symbols: tcfh30n (1-30a) TCFH60N (1-60a) tcfh100n (1-100a) construction: finger-safe mounting: din rail or panel mount ampacities: tcfh30n - holds any 1-30a cubefuse TCFH60N - holds any 1-60a cubefuse tcfh100n - holds any 1-100a cubefuse voltage rating: 600vac/dc withstand rating: 300ka rms sym. (ul) 200ka rms sym. (csa) 100ka dc (ul & csa) agency information: ?ul listed fuse holder: guide izlt, file e14853 ?csa certified fuse holder: class 6225-01, file 47235 ?ce compliance for the european union low voltage directive operating and storage temperature range: -40 to 80? material specifications: ?holder case: glass filled pbt ?interface clips: copper alloy ?interface clip plating: tin ?terminals: steel ?din rail spring: stainless steel features and product benefits holder for the world s first finger-safe power fuse system. holder and cubefuse together deliver class cf and class j fuse performance in a time-delay or fast-acting version. see data sheet 9000 for time-delay indicating and non-indicating cubefuse performance characteristics. see data sheet 2147 for fast-acting cubefuse performance characteristics. smallest fuse and holder footprint of any class fuse installation including class j, cc, t and rk. din rail or panel mount for easy installation. holders dovetail together to easily achieve the required number of poles. all holders (tcfh30n, TCFH60N and tcfh100n) dovetail together to permit mixing ampacities. all holders accept equal and lower amp rated tcf_ indicating and tcf_rn non-indicating time-delay cubefuse or fcf_rn fast-acting cubefuse - no need for a fuse reducer. dual wire rated terminals for wiring ease. high 300ka withstand rating stands up to high fault currents. conductors/wire range - 75? cu wire only part carton weight per carton number qty. lbs kg tcfh30n 12 2.42 1.10 TCFH60N 12 2.57 1.17 tcfh100n 6 1.38 0.63 holder/ no. of single dual ampacity poles* wire wire tcfh30n 1 18 to 8 awg 18 to 10 awg TCFH60N 1 18 to 4 awg 18 to 6 awg tcfh100n 1 18 to 1 awg 6 awg * holders dovetail together to achieve the desired number of poles for the application. carton quantity and weight terminal torque ratings by conductor and holder size (75 c cu only) tcfh30n TCFH60N tcfh100n single dual single dual single dual 10-8 awg 25lb-in 18-10 awg 25lb-in 18-10 awg 20lb-in 18-10 awg 20lb-in 18-10 awg 25lb-in 6 awg 45lb-in 18-12 awg 20lb-in 8-4 awg 35lb-in 8-6 awg 35lb-in 8-1 awg 40lb-in 0710 bu-sb10812 page 1 of 2 data sheet 9007
a b c d a a d b c e f tcfh dimensions ?in (mm) tcfh30n & TCFH60N tcfh100n tcf_100rn fcf_100rn cf_ quik-spec safety switch disconnect (optional window). data sheet 1156 ccp_cf 1-, 2- & 3-pole switched disconnects data sheet 1157 cubefuse availability and applications the indicating low-peak time-delay cubefuse (tcf_) and non-indicating low-peak time-delay cubefuse (tcf_rn) are available in amp ratings from 1-100a. see data sheet 9000. the non-indicating, fast-acting low-peak cubefuse is available in amp ratings from 1-100a. see data sheet 2147. the cubefuse is also used in these other cooper bussmann circuit protection solutions. holder a b c d e f tcfh30n 2.30 0.76 1.357 0.15 - - (58.50) (19.37) (34.24) (3.76) - - TCFH60N 2.60 1.03 1.60 0.17 - - (66.12) (26.23) (40.64) (4.34) - - tcfh100n 2.91 1.05 2.01 0.15 0.80 2.51 (73.81) (26.74) (50.93) (3.81) (20.39) (63.65) 2011 cooper bussmann www.cooperbussmann.com 0711 bu-sb10812 page 2 of 2 data sheet 9007 the only controlled copy of this d ata sheet is the electronic read-only version located on the c ooper b ussmann network d rive. a ll other copies of this document are by definition uncontrolled. this bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end use r with design applications. c ooper b ussmann reserves the right, with- out notice, to change design or construction of any products and to discontinue or limit distribution of any products. c ooper b ussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. once a product has been selected, it should be tested by the user in all po ssible applications. ccpb 1-, 2- & 3-pole disconnects for the quik-spec coordination panelboard. data sheet 1160
|
